Posted on

Silverson High Shear Mixers

About Sliverson


Silverson has specialized in the manufacturing of quality high shear mixers for processing and manufacturing industries world wide for more than 70 years. Silverson has become the leader in the field of high shear mixers while serving food, pharmaceuticals, cosmetics, luboils and petrochemical industries.

The company supplies a wide range of standard mixers as well as custom designed equipment to meet an individual customer’s requirements. Developing and applying new high shear mixing techniques to meet these needs, Silverson has the experience, knowledge and commitment to both quality and service to solve today’s mixing needs and those of the future.

Featured Products


Top Entry Batch Mixers

Batch Mixers

Silverson’s batch mixers emulsifies, homogenizes, solubilizes, suspends, disperses and disintegrates solids in addition to mixing. Silverson mixers outperform conventional mixers due to their precision-engineered Silverson rotor/stator workhead. As a result, it is able to cut process times by up to 90%. These mixers improve quality, product consistency and process efficiency.

Inline Mixer

In-Line Mixers

The action of any Silverson In-Line mixer can be modified with the use of rapidly interchangeable workheads. This enables any machine to mix, emulsify, homogenize, solubilize, suspend, disperse and disintegrate solids.

Silverson’s line of high shear In-Line mixers offers a great many advantages to the processor:

  • Speed
  • Versatility
  • Self-pumping
  • Aeration-free
  • Guaranteed Efficiency

Flashmix Powder/Liquid Mixers

FlashMix

The Silverson Flashmix takes a revolutionary approach to powder/liquid mixing by using a vacuum to pull in powders and forces powder into the liquid stream. This allows liquid to disperse and hydrate large volumes of powders and can be used at higher temperatures and with higher viscosity mixes. The Flashmix offers the advantages of high shear mixing to a wide range of applications that were previously not possible.

Above: Chris Logan of Cesco conducting a lab test on a client application.

Fill out the form below for more information!

CONTACT

Posted on

Alfa Laval – Gasketed Plate-And-Frame Heat Exchangers

Gasketed Plate-And-Frame Heat Exchangers


Gasketed Plate-And-Frame Heat Exchangers provide efficient heat transfer in compact equipment with a small footprint. The units have a flexible design and are easy to service and maintain. The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.

For more information regarding Alfa Laval’s Gasketed Plate-And-Frame Heat Exchanger line, click here.

Alfa Laval Services


Reconditioning your Gasketed Plate-And-Frame Heat Exchanger can:

  • Extend The Heat Exchangers’ Life
  • Minimize Operational Costs
  • Ensure Safety, Quality And Productivity
  • Satisfy New Environmental Legislation By Improving Energy Efficiency

Alfa Laval offers a number of pre-defined reconditioning packages, or customize a package of reconditioning services, to match your requirements for turnaround time, budget, brand and/or application.

Equipping your Heat Exchanger with the correct quality material can make a huge difference to your process.  Alfa Laval genuine plates are made using a single-step pressing method ensuring uniform plate strength and thickness over the entire plate – dramatically reducing the risk of fatigue cracking. Alfa Laval genuine rubber gaskets ensure tighter seals and a longer life.

Fill out the form below for more information!

CONTACT

 

Posted on

Sterimixer® The Original Magnetic Coupled Mixer for Pharmaceuticals

About Steridose


Steridose was founded in the late 1970’s in Sweden with the purpose of developing innovative process components for aseptic manufacturing.  Steridose introduced technologies such as magnetically driven mixers and radial type diaphragm valves to the pharmaceutical industry in the 1980’s.  In the early 2000’s, the company became part of the Roplan Group, consolidating development and manufacturing.  Through the years, Steridose has developed an extensive distribution network with representation in over 30 countries and has a vast equipment installed base. Steridose continues innovating based on the feedback and needs of customers. In 2015, Roplan and Steridose formed Velcora Group.

The most common purpose of agitation in bio-pharmaceutical processing is liquid/liquid and solid/liquid blending (solutions and suspensions). Agitators are performing their duty while submerged in a fluid phase, and consequently designed for this intended use, considering that running in air would not fit any purpose. This article discusses different bearing designs and materials of construction typically available. Click here to read White Paper.

The Sterimixer may be the most widely used magnetically coupled mixer for bio-pharmaceutical applications world-wide.  It consists of the following major components: impeller, bearing, weld-plate, drive unit and control box.  All wetted parts of the impeller and the weld-plate are made of AISI 316 L (EN 1.4404).  Interchangeable impeller designs are available.

Sterimixer Features


  • Effective mixing
  • Mixing to the Last Drop
  • CIP/SIP Design
  • Removable drive-units
  • Bottom Mounted
  • Prevents sedimentation
  • Interchangeable Impellers
  • Low shear Design
  • Autoclavable
  • Variable Speed
  • High Performance
  • Reduces foaming
  • For vessels from 5 liters – 30.000 liters
  • Fully CIP/SIP Clean In Place / Steam In Place.
  • Full containment
  • No Need for Baffles

Fill out the form below for more information!

CONTACT

Posted on

Ferrum Inc. – Exhibitor at Specialty & Agro Chemicals America

by Scott Sobolewski at 8:30 AM in Chemical Industry, Brand Awareness, Vendor/Partner News

Again in 2017, CESCO partner Ferrum Inc. was present at this small but very focused show in Charleston, SC. Also this year, it was a pleasure to welcome many participants at Table at the Hotel Belmond Charleston Place. We not only appreciated the interesting conversations held in a pleasant atmosphere, but also the direct contacts to our existing and potential customers. We thank all the visitors and look forward to actively support you with current and future projects with centrifuges from Ferrum.

Posted on

CESCO Sells Modular Distillation Plant for Solvent Recovery & Purification for Re-Use

by Scott Sobolewski at 9:24 AM in Chemical Industry, Brand Awareness, Vendor/Partner News

CESCO was involved in the sale of a modular distillation plant, designed and built by partner Sulzer Chemtech USA, Inc.​​, and installed in the Charlotte, NC area. The scope also included a hot oil skid designed and fabricated by Heatec, Inc., another CESCO partner. The plant is used for the recovery and purification of dimethylacetamide (DMAc), an important solvent used in the ​manufacturing of engineered thermoplastics for high temperature applications​.

Posted on

Successful Installation for LAKOS in Filtering Out Cooling Tower Particulates to Protect Downstream Heat Transfer Surfaces

​CESCO was involved in the successful sale and installation of a LAKOS filtration skid at an inorganic chemical plant in North Carolina. The equipment was installed in between their cooling tower system and important process heat transfer equipment being fed by the tower water.