Gasketed Plate-And-Frame Heat Exchangers
Gasketed Plate-And-Frame Heat Exchangers provide efficient heat transfer in compact equipment with a small footprint. The units have a flexible design and are easy to service and maintain. The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
For more information regarding Alfa Laval’s Gasketed Plate-And-Frame Heat Exchanger line, click here.
Alfa Laval Services
Reconditioning your Gasketed Plate-And-Frame Heat Exchanger can:
- Extend The Heat Exchangers’ Life
- Minimize Operational Costs
- Ensure Safety, Quality And Productivity
- Satisfy New Environmental Legislation By Improving Energy Efficiency
Alfa Laval offers a number of pre-defined reconditioning packages, or customize a package of reconditioning services, to match your requirements for turnaround time, budget, brand and/or application.
Equipping your Heat Exchanger with the correct quality material can make a huge difference to your process. Alfa Laval genuine plates are made using a single-step pressing method ensuring uniform plate strength and thickness over the entire plate – dramatically reducing the risk of fatigue cracking. Alfa Laval genuine rubber gaskets ensure tighter seals and a longer life.
Fill out the form below for more information!
Steridose was founded in the late 1970’s in Sweden with the purpose of developing innovative process components for aseptic manufacturing. Steridose introduced technologies such as magnetically driven mixers and radial type diaphragm valves to the pharmaceutical industry in the 1980’s. In the early 2000’s, the company became part of the Roplan Group, consolidating development and manufacturing. Through the years, Steridose has developed an extensive distribution network with representation in over 30 countries and has a vast equipment installed base. Steridose continues innovating based on the feedback and needs of customers. In 2015, Roplan and Steridose formed Velcora Group.
The most common purpose of agitation in bio-pharmaceutical processing is liquid/liquid and solid/liquid blending (solutions and suspensions). Agitators are performing their duty while submerged in a ﬂuid phase, and consequently designed for this intended use, considering that running in air would not ﬁt any purpose. This article discusses different bearing designs and materials of construction typically available. Click here to read White Paper.
The Sterimixer may be the most widely used magnetically coupled mixer for bio-pharmaceutical applications world-wide. It consists of the following major components: impeller, bearing, weld-plate, drive unit and control box. All wetted parts of the impeller and the weld-plate are made of AISI 316 L (EN 1.4404). Interchangeable impeller designs are available.
- Effective mixing
- Mixing to the Last Drop
- CIP/SIP Design
- Removable drive-units
- Bottom Mounted
- Prevents sedimentation
- Interchangeable Impellers
- Low shear Design
- Variable Speed
- High Performance
- Reduces foaming
- For vessels from 5 liters – 30.000 liters
- Fully CIP/SIP Clean In Place / Steam In Place.
- Full containment
- No Need for Baffles
Steridose Selection Tool- STIR
STIR will utilize a few of your applications parameters and provide a mixer selection, performance parameters and the option of creating a one-page PDF with selection results.
Fill out the form below for more information!
CESCO participated in the 10th Lithium Supply & Markets Conference, with centrifuge partner Ferrum. Ferrum supplies continuous pusher centrifuges and batch vertical & horizontal basket centrifuges.
by Scott Sobolewski at 8:30 AM in Chemical Industry, Brand Awareness, Vendor/Partner News
Again in 2017, CESCO partner Ferrum Inc. was present at this small but very focused show in Charleston, SC. Also this year, it was a pleasure to welcome many participants at Table at the Hotel Belmond Charleston Place. We not only appreciated the interesting conversations held in a pleasant atmosphere, but also the direct contacts to our existing and potential customers. We thank all the visitors and look forward to actively support you with current and future projects with centrifuges from Ferrum.
by Scott Sobolewski at 9:24 AM in Chemical Industry, Brand Awareness, Vendor/Partner News
CESCO was involved in the sale of a modular distillation plant, designed and built by partner Sulzer Chemtech USA, Inc., and installed in the Charlotte, NC area. The scope also included a hot oil skid designed and fabricated by Heatec, Inc., another CESCO partner. The plant is used for the recovery and purification of dimethylacetamide (DMAc), an important solvent used in the manufacturing of engineered thermoplastics for high temperature applications.
CESCO was involved in the successful sale and installation of a LAKOS filtration skid at an inorganic chemical plant in North Carolina. The equipment was installed in between their cooling tower system and important process heat transfer equipment being fed by the tower water.